However, when I attach or remove it, a message does pop up from the Intel Rapid Storage Technology notifier saying that a disk has been detected.Įdit: now includes pictures showing the boot order, selecting to boot from the SSD, and the error message. I don't know if that's of concern or not. I should also note that when I insert the SSD into the USB/eSATA docking station I have, it is not visible in Windows. I then booted into the BIOS and ran a disk check, which showed no problems.Īgain, this is on an HP Envy 14 running Windows 7 Home Premium. I received an error message, asking my to please insert a bootable disk. Restore the image of my HDD to the SSD using clonezilla 4.Įverything went fine, until I attempted to boot from the SSD (I tried booting with it both physically inside the laptop, and in the docking station).Create a partition on the SSD larger than 105GB.Make an image of my HDD (using clonezilla) and save to an external hard drive.Resize the partition on my HDD (using GParted) to 105GB in order to.The current drive is a 320GB HDD in an HP Envy 14 laptop. Set the "boot" flag on the first partition on /dev/sdbīecause we dd'd the beginning of the disk in step 4, there will be no messing about with Startup Repair, bootrec, bootsec, or diskpart.I recently purchased a G.SKILL Phoenix Pro 120GB SSD, and attempted to make an image of my current drive, and restore that image to the new SSD. Finally, Copy, Paste, & Apply the partitions for /dev/sda to /dev/sdb in the normal manner.Ĩ. "Refresh Devices" in GPartEd, go to /dev/sdb and delete any partitions you see there.ħ. Let the "dd" run for a minute or two and then control-c out of it.Ħ. (This assumes sda is your source drive and sdb is the target)ĥ. Begin a sector-by-sector copy of the drive by typing: The easiest way to do this is by using Gparted from Live CD/USB as suggested above. Right-click on the desktop and start a root terminalĤ. Then, use the fdisk command to create a fresh partition table that matches the original. With the RAID drives and my SATA hard drive still unplugged, I plugged in my new SSD and put the Windows 7 hard drive into my SATA swap bay, planning to simply clone Windows 7 from the hard drive (along with installed programs and formatting) to the SSD. This will create a clone of your hard disk. The command should look something like this: dd if/dev/hard-disk-to-clone of/dev/cloned-hard-disk. Review the layout of partitions in GPartEd, delete any partitions on the target drive.ģ. First, use the dd command to create an exact copy of the hard disk. Connect drives to a host and boot the host with the GPartEd Live CDĢ. I just used this on Windows Server 2008 but it should work on Windows Server 2012, Windows 7 and Windows 8.ġ. Youll need an SSD with as much hard drive space as your current hard drive. The following is a simple method to clone a Windows disk quickly without all the messing around with boot sector issues. Purchase and install new SSD for transfer. And it has a windows partition that I dont need on the SSD (I never use Windows, so if it boots off of the other hard drive, thats fine). The catch is that the standard HDD is significantly bigger than the SSD. GPartEd is a fantastic free tool for copying and resizing disk partitions, but cloning an entire Windows disk often requires tweaking boot sectors and records after the partitions are copied and this is not always easy or intuitive. So, what Id like to do is clone my Ubuntu partition onto the SSD. A quick tech note from the day job some of you might find useful.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |